Storage Environment Requirements
PS decorative moldings should be stored in a dry, well-ventilated, and cool indoor environment, away from direct sunlight and exposure to high temperatures. Prolonged exposure to high-temperature environments may cause the material to soften slightly or deform, while humid environments may compromise the stability of the surface coating or decorative film. Additionally, the moldings should be kept away from open flames and strong heat sources to prevent accelerated material aging.
Stacking and Arrangement Methods
The moldings should be stacked horizontally and evenly on brackets or shelving units, avoiding direct contact with the ground to prevent moisture absorption or contamination. Stacks should not be built too high to prevent the bottom layers from deforming under pressure. For longer lengths of molding, every effort should be made to store them in a completely straight position to prevent bending or warping, which could compromise installation precision.
Protection and Handling Precautions
During storage, avoid placing heavy objects on top of the moldings or allowing sharp objects to scratch the surface, thereby preventing scratches or damage. When handling, exercise care and gentleness to avoid impacts to the ends or joint areas. For products featuring a decorative surface film or spray coating, it is recommended to cover them with a protective film or store them in their original packaging to preserve their aesthetic integrity.
